GE Appliances RV Water Heater Doors

4 products

A water heater door takes more weather than almost any other panel on the coach. It sits in full sun, catches road spray off the wheels, and holds a latch that gets worked every trip. When it cracks or stops closing flush, rain reaches the burner and gas controls behind it.

With GE the choice is simpler than most brands. The PM6 doors cover tank models and are listed for both 6 and 10 gallon openings, so there is no separate size to get wrong. The PMT doors are for the Profile tankless, which uses a different opening entirely. Both pairs come in white and black.

Check whether your heater is a tank or tankless model before ordering, and plan on fresh sealant around the flange, since the old bead rarely comes away cleanly.

What RV water heater door fits a General Electric (GE) RV water heater?

GE-branded RV water heaters were built on common chassis sizes, so fitment depends on the tank capacity and the cutout dimensions of the existing door frame, not the GE label itself. Measure the rough opening (width and height) on your sidewall and confirm whether the unit is a 6-gallon or 10-gallon configuration before ordering. If you are replacing a 10-gallon setup, cross-check parts in our 10 gallon RV water heater collection to verify your model.

How do I measure for a replacement RV water heater door?

Measure the outside dimensions of the existing door from edge to edge, then measure the wall cutout (the opening behind the door) for width and height. Note the hinge side and the latch style. Standard RV water heater doors are sized to 6-gallon or 10-gallon tanks, and the cutout will tell you which one you have. Confirm the model number stamped on the inner tank flange before ordering.

Can I replace just the door without replacing the whole water heater?

Yes. The access door is a separate exterior component that mounts to the sidewall flange of the water heater. If the tank, burner, and controls are working correctly, you can swap the door alone to fix cracking, sun damage, or a failed latch. Pair the new door with fresh sealant around the perimeter to keep water out of the sidewall.

What other parts should I check while replacing the water heater door?

While the door is off, inspect the anode rod, the T&P relief valve, the burner tube for spider webs, and the gasket between the tank flange and the sidewall. Cold-weather owners should also confirm the bypass valves and drain plug are in good shape, parts you can source from our RV winterizing kits collection before the next storage season.

Does United RV Parts offer free shipping on water heater doors?

Yes. Orders over $100 ship free within the contiguous United States. Water heater doors typically ship via standard ground carrier. If you need help confirming the right door for your tank size and cutout, text or call our team at 817-984-1852 before you order.